NOTICE: Banner
    Clearance
    MAPEI

    Flexcolor CQ 1.89 L Pre Mixed Grout

    SKU
    As low as:
    This acrylic pre-mixed grout is a blend of 50-75% silica sand and 2.5-5% titanium dioxide. It’s designed with BioBlock® technology to fight against mold and mildew. The grout is resistant to cracks, stains, and chemicals. It has a controlled shrinkage formulation and a relative density of 1.77 g/cm3. In its liquid form, the grout takes 6 days to cure and 24 hours to dry. It has a pH range of 8.3 and a flash point above 100 degrees Celsius. The grout is packaged in a 1.89 L container with a specialized pail design featuring a flip-top hinged lid. It’s suitable for grouting joints ranging from 1/16 inch to 1/2 inch. It’s perfect for grouting both interior and exterior floors, walls, countertops, and backsplashes. It can be used with glass tile/mosaics, porcelain, ceramic and natural stone tile, quarry, and cement-based terrazzo. The grout can also be used in wet conditions like bathtub surrounds, shower walls, and shower floors. It meets ANSI standards.
    See Full Details
    Pickup at 
    Select Store
    Delivery to
    Note: To pick up at a different store, you will need to change your store location.
    Available Delivery Options:
    Note: Full Delivery Options available in Checkout. See exact dates and fees during checkout.
    Item is No Longer Available for Delivery
    Check All Other Stores
    Note: To pick up at a different store, you will need to change your store location.
    Find in store at Not available in store at Select Store
    in Stock
    Product Details

    About this Product

    This acrylic pre-mixed grout is a blend of 50-75% silica sand and 2.5-5% titanium dioxide. It’s designed with BioBlock® technology to fight against mold and mildew. The grout is resistant to cracks, stains, and chemicals. It has a controlled shrinkage formulation and a relative density of 1.77 g/cm3. In its liquid form, the grout takes 6 days to cure and 24 hours to dry. It has a pH range of 8.3 and a flash point above 100 degrees Celsius. The grout is packaged in a 1.89 L container with a specialized pail design featuring a flip-top hinged lid. It’s suitable for grouting joints ranging from 1/16 inch to 1/2 inch. It’s perfect for grouting both interior and exterior floors, walls, countertops, and backsplashes. It can be used with glass tile/mosaics, porcelain, ceramic and natural stone tile, quarry, and cement-based terrazzo. The grout can also be used in wet conditions like bathtub surrounds, shower walls, and shower floors. It meets ANSI standards.

    Highlights

    • This grout can be used on sensitive tile surfaces once tested, requires no sealer and cures naturally from evaporation of the low level of water in the formulation
    • Comparison testing of MAPEI Flexcolor CQ versus traditional Portland-cement grout has verified that MAPEI Flexcolor CQ is 30% more cost-efficient and requires 65% less time to install
    • Stain- and chemical-resistant grout formulation with no sealing required
    • Easy cleanability, colour consistency and improved workability
    • Dries to a hard, uniform colour surface in 24 hours and will not stain surfaces
    • Crack-resistant and shrinkage-controlled formulation, with no efflorescence
    • Bibcock® technology for mould and mildew resistance
    • Use straight from the pail, without the need to add water
    • Specialized pail design with flip-top hinged lid
    • Standards: Meets or exceeds specific tests in ANSI A118.3 and A118.6 covering other grout types

    Product Information

    SKU # 1015090

    Model # 4KA500102

    Specifications

    Assembled Depth (in)

    0

    Assembled Height (in)

    0

    Assembled Width (po)

    0

    Weight (kg)

    4.54 kg

    Specifications General
    Non Shrink No
    Formation Liquid
    Brand Mapei
    Container Size 1.89 L
    Feature Bullets
    • This grout can be used on sensitive tile surfaces once tested, requires no sealer and cures naturally from evaporation of the low level of water in the formulation
    • Comparison testing of MAPEI Flexcolor CQ versus traditional Portland-cement grout has verified that MAPEI Flexcolor CQ is 30% more cost-efficient and requires 65% less time to install
    • Stain- and chemical-resistant grout formulation with no sealing required
    • Easy cleanability, colour consistency and improved workability
    • Dries to a hard, uniform colour surface in 24 hours and will not stain surfaces
    • Crack-resistant and shrinkage-controlled formulation, with no efflorescence
    • Bibcock® technology for mould and mildew resistance
    • Use straight from the pail, without the need to add water
    • Specialized pail design with flip-top hinged lid
    • Standards: Meets or exceeds specific tests in ANSI A118.3 and A118.6 covering other grout types
    Features Color Consistency, Easy to Clean, High Workability
    Product added to your cart
    Loading...